Two important things in advance:
- The following instructions only work via a web browser, not with the mytonies app.
- You can only change the language for messages of the Toniebox 1, e.g. code words, error or warning messages. It is not possible to change the language of a Tonie.
You can change the language of your installed Toniebox 1 to German, French, British or American English. We explain how to do it step by step. Important: Please have your Wi-Fi password ready.
- Switch on your Toniebox 1 and make sure that there’s no Tonie on top
- Press and hold both ears at the same time until you hear a sound signal and the LED starts flashing blue (about 10 seconds).
- Release the ears and wait until you hear the sound signal for the second time and the flashing turns into a pulsing blue (about 20 seconds). Your Toniebox 1 is now in connection mode.
- Open the Wi-Fi menu of your smartphone, tablet or computer. There you should see the Wi-Fi of your Toniebox 1. Please connect to this Wi-Fi network. Please note: This Wi-Fi does not connect to the internet, as it is only used to connect the two devices. If you see a message on your smartphone, tablet or computer, simply ignore it and connect to the Wi-Fi anyway.
- On the same device, open a web browser and enter the IP address of the Toniebox 1, 192.168.1.1, in the address bar without typing anything before or after it.
- You should now see a Tonie page with a selection menu. Select the desired language and confirm the selection with OK.
- In the next step, enter the access data for your WLAN again and connect the Toniebox 1 to the WLAN.
- As soon as the LED of your Toniebox 1 lights up green, the changes have been applied.
Regardless of the language of your Toniebox 1, any Tonie can be played on any Toniebox 1. However, a German Tonie always speaks German and an English Tonie always speaks English.